Van, Truck, Trailer, Bus and Coach Aftermarket News in Ireland

Compact multi-function jump start power pack from Laser Tools

Just in time for the colder weather, this multi-function jump starter from Laser Tools (part number 7405) is an efficient and extremely compact emergency engine starting power pack.

It features a bright LED to illuminate the work area, (flashing mode can be used as an emergency beacon), two USB outputs (for charging mobile phones, etc), a Type-C input/output port and a digital voltage display on the cable clamp adaptor.

The unit and accessories are supplied in a convenient and protective case.

The unit is charged from a suitable USB port on a PC, taking approximately three hours to fully charge. As it charges, the power/charging LED display will cycle through the four LEDs. Once fully charged, the LED display shows four indicator lights ON.

To jump start a car with a flat battery, simply connect up the cable clamp adaptor to the jump starter, connect the clamps to the car’s battery and start the car.

The jump starter is equipped with two USB ports that are suitable for charging and powering mobile phones, tablets, etc. Output 1 is a USB QC 3.0 rated port (3.6V – 12V; 1.5A – 3A). Output 2 is a standard USB port (5V 2.1A).

These are used with the multi-function lead which includes the following device connectors: USB, 2 x Type C and a micro-USB. Port 7 is a Type C input/output port which is used when charging the device but can also output (5V / 3A).

Laser Tools says this product will start diesel engines up to 3.5 litres and petrol engines up to 4.5 litres.

For more information on the Laser Tools range contact Tech ‘n’ Tools on 01 419 1611 or visit